How Ships Secretly Talk to Each Other: The Hidden Vocabulary of AIS Explained

Nov. 17 2026

The Automatic Identification System (AIS) is vital for modern maritime safety, vessel tracking, and global logistics. Yet behind the continuous stream of signals on radar plotters and fleet monitoring platforms lies far more than just a raw GPS coordinate. Discover the hidden vocabulary ships use at sea to communicate with each other.

an Ore tanker passing an oil tanker in a port

AIS is the digital backbone of modern maritime safety, vessel tracking, and global logistics. However, the continuous stream of signals unlocks more than just raw GPS coordinates. Standardized by the International Telecommunication Union (ITU), there are 28 distinct AIS message types. In this technical article, we break down the architecture of maritime data - exploring fundamental data categories, critical message types, and next-generation protocol updates.

The 3 Pillars of Maritime Data Transmission

To optimize bandwidth across the maritime VHF data link, the AIS protocol divides transmitted data into three primary structural pillars:

  • Dynamic Data: Automatically captured by onboard navigational sensors (such as GPS, gyrocompasses, and rate-of-turn indicators). These parameters change constantly and require high-frequency updates.
  • Static Data: Contains permanent or semi-permanent vessel attributes programmed into the transponder upon installation.
  • Voyage-Related Data: Manually updated by the ship's officers prior to departure and whenever voyage parameters change.

Technical Breakdown of Key AIS Message Types

While the ITU defines 28 message types, a specific subset forms the core of commercial fleet tracking, supply chain visibility, and maritime safety:

Message Types 1, 2 & 3: The Pulse of Global Commercial Shipping (Dynamic Data)

Message Types 1, 2, and 3 convey real-time dynamic position reports for Class A commercial vessels.

  • Data Payload: MMSI number, latitude/longitude, Course Over Ground (COG), Speed Over Ground (SOG), true heading (HDG), rate of turn (ROT), and navigational status (e.g., Under way using engine, At anchor, Not under command).
  • Transmission Interval: Highly frequent—ranging from every 2 to 10 seconds depending on speed and course changes (every 3 minutes when anchored).
  • Primary Purpose: Immediate ship-to-ship collision avoidance and localized vessel traffic management.

Message Type 5: Supply Chain Visibility and Destination Profiles (Static & Voyage)

Message Type 5 links the physical identity of the vessel to its operational parameters.

  • Data Payload: MMSI, IMO number, call sign, vessel name, ship type, physical dimensions (length, beam, antenna offset), destination port, Estimated Time of Arrival (ETA), and maximum present static draft.
  • Transmission Interval: Every 6 minutes, upon manual update, or on request.
  • Primary Purpose: Predictive ETA calculation, port authority berthing logistics, and end-to-end supply chain visibility.

Message Type 14: Emergency Alerts and SAR Coordination (Safety-Related Broadcast)

Person at sea emergency

Message Type 14 handles critical safety broadcasts when immediate intervention is required.

  • Triggers: Automatically generated by AIS-SART (Search and Rescue Transmitters) or personal MOB (Man-Overboard) distress beacons.
  • Primary Purpose: Broadcasts immediate high-priority alert strings (e.g., SART ACTIVE or MOB ACTIVE) directly onto the radar plotters and ECDIS screens of nearby vessels for swift localized rescue operations.

Message Type 27: Oceanic Fleet Tracking via Satellite AIS (Long-Range Broadcast)

Beyond the range of coastal receiver stations, terrestrial AIS coverage reaches physical limits.

  • Technical Engineering: Message Type 27 is specifically engineered for Satellite AIS reception. The bit payload is heavily compressed (96 bits total) to mitigate signal overlapping, orbital latency, and message collisions in space.
  • Primary Purpose: Continuous high-seas tracking across open ocean basins where terrestrial infrastructure is absent.

Industry Innovation: Message Type 28 (AtoN Report Single-Slot)

As maritime digitalization advances, VHF Data Link (VDL) efficiency has become a critical technical priority. A notable protocol development is the implementation of Message 28 (AtoN Report Single-Slot).

Solving the VDL Congestion Problem:

Legacy Aids to Navigation reports (Message 21) required two consecutive time slots in the TDMA data frame. Message 28 slashes this footprint down to a single time slot, doubling spectrum efficiency and preserving VDL capacity in congested waterways and busy port approaches.

Key Capabilities for Electronic Navigational Charts (ENC / ECDIS):

  • Dynamic Geofencing: Maritime authorities can instantly broadcast defined geographic zones (polygonal or circular geometries) to map temporary marine construction, offshore wind installations, or seasonal ice boundaries directly to ships' navigation displays.
  • Mobile AtoN Tracking: Enables continuous real-time tracking of mobile or deliberately drifting safety markers.
  • Instant Equipment Status Checks: Automatically alerts surrounding traffic if a physical buoy is damaged, unlit, or has drifted off-station (Off-Station alert).

AIS Message Type Architecture: Key Takeaways

Key AIS Message Types and Their Functions
Message TypeFunction
Message type 1-3Live Position & Speed (Sent every 2–10 seconds)
Message type 5Identity & Destination (Sent every 6 minutes)
Message type 14Emergency Alert / SART
Message type 27Satellite-Optimized Oceanic Tracking
New since Feb 2026: Message type 28Next-Gen Digital Aids to Navigation & Smart Area Notices

Read more from the Ship Monitor AIS Knowledge Hub: